1-800-730-4649
LANGUAGES
CORPORATE WEBSITE
PV CONTRACTOR BLOG
You have no items in your shopping cart.
Electrical data
| Module type | Poly |
| Nominal power | 230 W |
| Voltage at nominal power | 29.4 V |
| Current at nominal power | 7.82 A |
| Open-circuit voltage | 36.5 V |
| Short-circuit current | 8.3 A |
Data at normal operating cell temperature (NOCT)
Temperature coefficients
| Power [%/K] /// or /// Performance coefficient [PUPP] | -0.46 %/ ºC |
| Open-circuitvoltage [mV/K] /// or /// Temperature coefficient [VOC] | -0.346 %/°C |
| Short-circuitcurrent [mA/K] /// or /// Temperature [ISC] | 0.065 %/°C |
Characteristic data
| Solar cells per module | 60 |
| Cell type | Polycrystalline |
| Connection | TYCO SOLARLOK |
| Frame material | Silver anodized aluminium |
Dimensions and weight
| Dimensions | 64.57" x 39.06" x 1.97" |
| Length (mm/m) or (inch) | 64.57 inch |
| Width (mm) | 39.06 inch |
| Thickness [mm] | 1.97 inch |
| Weight [kg] / [lbs] | 43.94 lbs |
Limits
| System voltage | 600 V |
| Maximum reverse current | 12 A |
| Maximum load | 50 lbs/fts |
Permission and certificates
| Permission and certificates | UL 1703, ULC/ORD-C1703, CE |
The CENTROSOLAR E-Series PV Module was developed with the highest quality standards for professional commercial installations. Manufactured by our partner in China, and engineered, developed and tested under our strictest quality standards, this product has already been installed in many applications. The CENTROSOLAR E-Series module consists of 72 polycrystalline high-efficiency silicon cells, allowing higher power output per module, up to 275Wp. This allows unique advantages for most applications, reducing installation and balance-of-system costs.
The CENTROSOLAR E-Series has been designed to meet the highest demands and to resist rigorous climatic conditions in North America - including ice, hail, snow, storm, high humidity and intense thermal fluctuation. Neither heat nor cold can harm the CENTROSOLAR E-Series. It makes optimum use of available solar energy reliably, in order to generate very high yields of power.
Energy from High-Performance Products
The CENTROSOLAR E-Series is manufactured with an anodized aluminum frame with hexagon drainage holes and grounding hole on four sides. The modules are made with high quality raw materials, including top branded EVA and triple-layer back sheet and high-transparency low-iron impact-resistant tempered glass.
Premium Quality
- Proven field performance on MW-scale ground mounted projects in Europe
- Confirms to UL 1703, IEC and CE standards
- Manufactured by partner under highest quality standards using German process techniques
- CENTROSOLAR quality inspection of manufacturing process in China
- Separate measurement of every single CENTROSOLAR module after the production process is complete
- Unchangeable serial number (laminated onto the front and back)
- Internal by-pass diodes across 24 series cells resists effects of shading
Performance Guarantee
CENTROSOLAR guarantees to refund or replace modules if power losses exceed 10% within 10 years and 20% within 25 years (please refer to standard warranty agreement). We stand behind every solar module that leaves our warehouse, including a 5 year workmanship warranty.
